ENVIRON Body Roll-CIT - dual-head body microneedling roller 0.1 mm

Go to Product feedback

€204.97

By purchasing the product, you will receive 890 pts.

Find out more about the loyalty program.

A device for home microneedling treatment, used to intensively enhance the results of Environ skin care. A professional cosmetic roller with two body heads and 0.1 mm micro-needles made of surgical steel. It microneedles only the stratum corneum, allowing active ingredients to penetrate deeper into the skin more effectively.

Go to full description

Availability:

temporarily unavailable

Ask about the product

Body Roll-CIT is an innovative microneedling device that, when combined with Environ cosmeceuticals, stimulates collagen production and improves the elasticity of body skin.

Cosmetic Body Roll-CIT by Environ is a professional product made of surgical steel for microneedling larger areas of the body. It ensures safe use at home. Cosmetic Body Roll-CIT is a device that non-invasively increases the penetration of active ingredients into the deeper layers of the skin.

The device has two heads with 0.1 mm micro-needles, which puncture only the stratum corneum, the greatest barrier to the active ingredients contained in creams. The needle length was developed on the basis of many years of skin research. Environ microneedling does not cause skin bleeding, and the microchannels regenerate within 8 hours during sleep.

Recommended for use with Environ cosmeceuticals!

For whom: thin and lax body skin, cellulite, stretch marks and scars.

Benefits of regular use of Body Roll-CIT in combination with recommended Environ cosmeceuticals:

Improves the absorption of key active ingredients
Restores skin firmness
Reduces scars
Helps reduce stretch marks

Recommended products:

Vitamin ACE Body Oil - skin regeneration and thickening
Tri-Retinoid Complex Retinol Serum Forte - intensive skin regeneration and thickening
Contouring Cream - cellulite reduction, skin tightening and hydration
Instrument Cleaning Solution - recommended for disinfecting the device

CAUTION:

Please make your purchase carefully. Devices showing any signs of use cannot be returned.
Do not use on acute inflammatory skin conditions requiring pharmacological treatment or on damaged skin.

Product specification:

216 surgical stainless steel needles, length 0.1 mm
Needle material: surgical steel 316L
Handle material: plastic
Needle length: 0.1 mm

About 316L steel

Stainless steel 316L is a high-quality austenitic steel with reduced carbon content, used in medical, surgical and cosmetic instruments. It contains chromium, nickel and molybdenum, which provide very good resistance to corrosion, moisture, disinfectants and contact with cosmetic formulations. The letter “L” denotes low carbon, which reduces the risk of intergranular corrosion and improves material durability. 316L steel has a smooth, non-porous surface, making it easy to clean and disinfect thoroughly and not prone to trapping contaminants. In practice this means the material is:

resistant to rust and moisture
durable and chemically stable
suitable for repeated skin contact
commonly used in professional cosmetic and medical accessories

It is worth noting that the 316L designation does not indicate low quality — on the contrary, it is one of the most valued grades of stainless steel for applications requiring high resistance and hygiene.

Usage:

Cleanse and tone with your preferred Environ products.
Divide the treatment area into sections.
Gently roll over the areas of the body you wish to treat, one section at a time.
Roll vertically, diagonally and horizontally with the pressure that is comfortable for you, then move to the next area.
Apply the dedicated product: Vitamin ACE Body Oil, Tri‑Retinoid Complex Retinol Serum Forte or Contouring Cream depending on skin needs.
Disinfect the device according to the instructions below.
Start by using twice a week, gradually increasing to daily use.
Before first use, we recommend reading the leaflet supplied with the device.

Cleaning:

After use, run the device under hot water (not boiling) and spray with a disinfectant available at pharmacies, e.g. Octanisept.
Leave to dry completely, then place the Body Roll‑CIT in its protective container.
It is also recommended to use once a week the specialist ENVIRON Instrument Cleaning Solution to disinfect Roll‑CIT dermarollers: place the device in the specially designed container and pour the solution so that it covers the tips. Leave for up to 10 minutes, remove the device and discard the solution. Rinse the device thoroughly with warm water. Allow the device to dry before storing or reusing.

Use and precautions:

Use as directed.
For external use only.
Do not use on children under 12 years of age.
Do not use on acute inflammatory skin conditions that require pharmacological treatment or on damaged skin.
The product is intended for use by one person only.
Keep out of reach of children and use only as recommended.
The product can be used on all skin types, but must not be used in the following cases: eczema, psoriasis, raised moles, actinic keratosis, warts, rosacea, undiagnosed or suspicious moles and skin tags, herpes simplex, skin cancer, dermatoses of viral, bacterial or fungal origin.

Certificates and safety warnings

Manufacturer:

Environ Skin Care (Pty) Ltd

Address:

Po Box 233, Parow, 7499 Cape Town, South Africa

Phone:

+27 21 931 3721

E-mail:

info@environskincare.com

Responsible person in the EU:

Biorius

Address:

14 Avenue Léonard de Vinci, 1300 Wavre, Poland

Phone:

32 2 888 4010

E-mail:

info@biorius.com

Importer:

Protea AntiAging Sp. z o.o

Address:

Bohdanowicza 19 lok. 7, 02-127 Warszawa, Poland

Phone:

603 413 222

E-mail:

zamowienia@proteaantiaging.pl

Your cart is empty

ENVIRON Body Roll-CIT - dual-head body microneedling roller 0.1 mm

Opis produktu