Skip to main content
Open search engine
Search
Close search engine Clear Search
Products in the cart: 0. See details

Your cart is empty

English
Manufacturer: Environ (go to products)

ENVIRON Cosmetic Focus-CIT - precision home microneedling stamp 0.1 mm

Go to Product feedback
€39.15
By purchasing the product, you will receive 170 pts.
Find out more about the loyalty program.

A stamp-shaped device designed for microneedling hard-to-reach areas of the face. Focus-CIT can be used to perform a treatment in the tear trough, on the brow arch, around the mouth, and in the area of the nasolabial folds and sides of the nose. It has 14 stainless-steel micro-needles, 0.1 mm long.

5‑minute microneedling of the face, neck and decollete increases the penetration of active ingredients by up to 100 thousand times! 

Go to full description
piece
Availability:
high amount
Shipping time: 24 hours
Ask about the product
Share

Opis produktu

A device for targeted home mesotherapy treatment that increases the penetration of active ingredients deep into the skin.

Cosmetic Focus-CIT by Environ is a professional product made of surgical steel. It ensures safe use at home. Cosmetic Focus-CIT is a device that non-invasively increases the penetration of active ingredients into the deeper layers of the skin.

The device has 14 micro-needles, 0.1 mm long, which puncture only the stratum corneum, the greatest barrier to the active ingredients contained in creams. The needle length was developed on the basis of many years of skin research. Environ microneedling does not cause skin bleeding, and the microchannels regenerate within 8 hours during sleep.

Recommended for use with Environ cosmeceuticals!

The Focus-CIT stamp is designed for daily microneedling of the epidermis before applying products whose molecule size makes it difficult for them to penetrate the skin independently, as well as to enhance the results of other products.

For whom: thin and lax skin around the eyes, crow's feet, wrinkles around the mouth, drooping eyelid, discolouration and visible capillaries around the sides of the nose.

Benefits of regular use of Focus-CIT in combination with recommended Environ cosmeceuticals:

  • Increases the penetration of cosmetics deep into the skin
  • Helps restore skin elasticity
  • Accelerates the restoration of an even skin tone
  • Reduces scars and wrinkles

Recommended products:

CAUTION: 

  • Please make your purchase carefully. Devices showing any signs of use cannot be returned. 
  • Do not use on acute inflammatory skin conditions requiring pharmacological treatment or on damaged skin.

Product specification:

  • Needle material: surgical steel 316L
  • Handle material: plastic
  • Needle length: 0.1 mm

About 316L steel

Stainless steel 316L is a high-quality austenitic steel with reduced carbon content, used among others in medical, surgical and cosmetic instruments. It contains chromium, nickel and molybdenum, which gives it very good resistance to corrosion, moisture, disinfectants and contact with cosmetic preparations. The letter "L" stands for low carbon, i.e. low carbon content. This reduces the risk of intergranular corrosion and improves the durability of the material. 316L steel has a smooth, non-porous surface, so it is easy to clean and disinfect thoroughly and does not favour retention of contaminants.

In practice this means the material is:

  • resistant to rusting and moisture
  • durable and chemically stable
  • suitable for repeated contact with skin
  • commonly used in professional cosmetic and medical accessories

It is worth noting that the designation 316L does not indicate low quality – on the contrary, it is one of the most valued grades of stainless steel for applications requiring high resistance and hygiene.

Usage:

The Focus-CIT device may be introduced no earlier than at the second level of the Environ Vitamin STEP-UP SYSTEM vitamin protocol, when the skin is appropriately prepared. Rinse the device with hot water before and after each use.

  1. In the evening, after cleansing and toning the skin, apply the device to the chosen area (e.g. eye area, lips), with gentle pressure and overlapping passes until the whole area is covered:
    • Zones 1 and 2: eye area – 1.5 minutes per side
    • Zone 3: upper lip – 1 minute
  2. Apply Environ products recommended for the given skin type.
  3. Start using the device twice a week and gradually increase frequency up to daily use.
  4. Once a week thoroughly clean the device using Environ Instrument Cleaning Solution.
  5. Before storing or reusing, allow the device to dry.
  6. Store the dry device in the dedicated protective container with the needles pointing down.
  7. If hypersensitivity, irritation or a rash occurs, reduce the frequency of treatments. If symptoms persist, consult an Environ skin care specialist.
  8. Before first use we recommend reading the leaflet supplied with the device.

Cleaning:

  1. After use, run the device under hot water (not boiling) and spray with a disinfectant available in pharmacies, e.g. Octanisept.
  2. Leave to dry completely, then place the Focus-CIT in the dedicated protective container.
  3. It is also recommended to use once a week the specialist ENVIRON Instrument Cleaning Solution for disinfecting Roll-CIT dermarollers: place the device in the specially designed container, then pour the solution so that it covers the tips. Leave for up to 10 minutes, remove the device and pour out the solution. Rinse the device thoroughly with warm water. Before storing or reusing, allow the device to dry.

Precautions:

  • Use as directed
  • For external use only
  • Do not use on children under 12 years of age
  • Do not use on acute inflammatory skin conditions requiring pharmacological treatment or on damaged skin
  • The product is intended for use by one person only
  • Keep out of reach of children and use only as recommended
  • The product can be used on all skin types, but must not be used in the following cases: eczema, psoriasis, raised moles, actinic keratosis, warts, rosacea, psoriasis, eczema, actinic keratosis, undiagnosed or suspicious moles and skin tags, herpes, skin cancer, dermatoses of viral, bacterial or fungal origin

The Focus-CIT device is covered by a 6-month warranty with proof of purchase. Maximum product lifetime with regular use: up to 2 years.

Certificates and safety warnings

Manufacturer:

Environ Skin Care (Pty) Ltd

Address:

Po Box 233, Parow, 7499 Cape Town, South Africa

Phone:

+27 21 931 3721

E-mail:

info@environskincare.com

Responsible person in the EU:

Biorius

Address:

14 Avenue Léonard de Vinci, 1300 Wavre, Poland

Phone:

32 2 888 4010

E-mail:

info@biorius.com

Importer:

Protea AntiAging Sp. z o.o

Address:

Bohdanowicza 19 lok. 7, 02-127 Warszawa, Poland

Phone:

603 413 222

E-mail:

zamowienia@proteaantiaging.pl